Control 16 adapter for Jung Smart Control 10
The KNX Touch Panel Control 16 is the perfect alternative to the Jung Smart Control 10. The modern operating panel can easily display the entire KNX building control system on its generous 15.6-inch Full HD display. Thanks to the matching adapter, both KNX touch panels can be exchanged without any problems. The adapter allows the Control 16 to be attached directly to the flush-mounted box of the Jung Smart Control 10.
You can find the complete replacement set here.
Please note: The Control 16 requires a power supply of 24 V DC/2.4 A. To use the Control 16 in the corresponding flush-mounted box an additional power supply may be necessary.
This top-quality adapter allows the mounting of the Control 16 into the flush-mounted box of a Jung Smart Control 10. For fixing the panel into the corresponding flush-mounted box, the adapter plate is screwed to the flush-mounted box and the Control 16 is fixed to it - thus drilling new holes is not necessary.
- Adapter plate
- 4x M4x10 countersunk screws
- 2x M3x12 countersunk screws
Compatible control panels:
- Jung Smart Control 10