Control 16 surface-mounted frame for Merten IP-Touch 10"
The KNX Touch Panel Control 16 is the perfect alternative to the Merten IP-Touch 10". The modern operating panel can easily display the entire KNX building control system on its generous 15.6-inch Full HD display. Thanks to the matching adapter, both KNX touch panels can be exchanged without any problems. The surface-mounted frame allows the Control 16 to be attached directly to the flush-mounted box of the Merten IP-Touch 10".
You can find the complete replacement set here.
Please note: The Control 16 requires a power supply of 24 V DC/2.4 A. To use the Control 16 in the corresponding flush-mounted box an additional power supply may be necessary.
The surface-mounted frame for replacing the Merten IP-Touch 10" is of high-quality workmanship. The aluminium frame is milled from one block and supports the heat dissipation of the Control 16. The stainless steel plate is used for mounting on the corresponding flush-mounted box. The combination of these two components guarantees stability and a high durability.
To fix the Control 16 the surface-mounted frame is attached directly to the corresponding flush-mounted box – drilling new holes is therefore not necessary.
- Surface-mounted frame
- Steel plate
- Surface-mounted adapter
- 4 pcs. M3x6 lens head screws
- 2 pcs. M3x10 lens head screws
- 4 pcs. M3x12 countersunk screws
Compatible control panels:
- Merten IP-Touch 10"