Controlmini Adapter for Gira-Control-9 flush-mounted box
You are no longer satisfied with your KNX control panel? Then exchange it for our 11.6-inch KNX touch panel Controlmini! Thanks to the matching adapter, both KNX touch panels can be exchanged without any problems.
You can find the whole replacement set here.
Please note: The Controlmini requires a power supply of 24 V DC/2.4 A. To use the Controlmini in the corresponding flush-mounted box, an additional power supply may be necessary.
These special adapters enable the Controlmini to be mounted in the existing Gira-Control-9 flush-mounted box (Client 1 and 2). Thanks to flush-mounted installation of the 11.6-inch Controlmini, it lies ultra-flat on the wall with a wall distance of only a few millimetres.
The adapters are attached directly to the Control-9 flush-mounted box to hold the Controlmini in place – no need to drill new holes.
PEAKnx Tutorial Controlmini Adapter for Gira Control 9 flush mounted box
To install the Controlmini, you can alternatively use the flush-mounted box of the Gira Control 9 in addition to our flush-mounted box - for this, you need our matching PEAKnx adapters. In our video tutorial (in german) we explain step by step the installation of the Controlmini in a flush-mounted box of the GIRA Control 9.
- Adapter for GIRA-Control-9 flush-mounted box
- 4 pcs. M3x12 countersunk screws
- Dimensions (W x H x D): 166 mm x 49 mm x 33 mm
- Weight: 47 g
