Controlmini surface-mounted flat-design frame
With the surface-mounted flat design frame, the Controlmini is mounted very flat on the wall - without the need for chiseling work. Thanks to the Wi-Fi integrated in the Controlmini, only one supply cable is required at the installation site to commission the touch panel as a client. For commissioning as a server, a KNX cable is also required.
High quality processing
The surface-mounted flat design frame is an aluminum frame milled from one block, which is not only convincing due to its stability, but also due to its good thermal conductivity and a high-quality finish.
Fast, ultra-flat wall mounting
The surface-mounted frame enables an ultra-flat wall attachment with floating effect. The surface-mounted flat-design frame is attached directly to the wall with four screws (for example, above a switch box). At the installation site itself, a supply cable is all that is required to put the Controlmini into operation as a Client. Thanks to the integrated Wi-Fi, network-based visualizations can be easily displayed on the Controlmini. To use the Controlmini with its server function, a connection to the KNX network is also required.
- Controlmini surface-mounted flat-design frame
- 4 pcs. 6mm (F6) dowels
- 4 pcs. 4x40mm wall screws
- 4 pcs. M3x12 countersunk screws for panel mounting
- 1 pc. Drilling template
- 1 pc. 0.5 m CAT6 flat patch cable
- Dimensions (W x H x D): 258 mm x 199 mm x 17 mm
- Weight: 238 g