Control 16 replacement kit: Jung Smart Control 10
From €3,599.00
To €4,974.00
In stock
The KNX touch panel Control 16 is the perfect alternative to the Jung Smart Control 10. The modern operating panel can easily display the entire KNX building control system on its generous 15.6-inch Full-HD display. In addition to the included YOUVI software, any other Windows- or web-based visualisation can be used for building control. Users thus not only receive an elegant KNX operating device with a higher resolution display compared to the replacement device, but also an appealing visualisation of the home control system. Thanks to the adapter contained in the replacement set, the Control 16 is quickly installed in the previous flush-mounted box, type SC 10 EGB, without the need for any further chiselling work.
Please note: The Control 16 requires a power supply of 24 V DC/2.4 A. To use the Control 16 in the corresponding flush-mounted box, an additional power supply may be necessary.
Current delivery time: 2 weeks
Control 16: The reliable KNX Smart Home solution
The Control 16 is a reliable 15.6-inch multi-touch panel with integrated KNX interface, high-quality design, powerful performance and tested industrial components. As an alternative for the Jung Smart Control 10, the Control 16 also covers all common functions of KNX building control. Thus the states of the most common devices (e.g. light, blinds, heating or dimmer) can be displayed and controlled without any problems. In addition to the area of house and room control, the Control 16 can also be used as a status and information display or as an intercom for door communication systems.
The ideal replacement for the Jung Smart Control 10
The Control 16 is the perfect replacement device for the old Jung Smart Control 10. It is a full-fledged computer equipped with Windows LTSC, which enables the use of all Windows- and web-based visualisation systems (e.g. Gira QuadClient, X1, or CubeVision from BAB-Tec). The desired visualisation can be shown on the larger and higher-resolution display without any problems. Or you can use the included visualisation YOUVI, which automatically creates itself from the ETS project and fulfils the highest design demands. In addition, users benefit from the features provided by Windows, such as fast navigation using wiping gestures or eye-friendly operation in the darkened night mode. The preinstalled Windows LTSC reduces maintenance and software problems as no Windows updates are allowed except for security updates. Browser applications, e.g. for playing music on external speakers, can also be used via the Control 16. The flat Control 16 becomes a real eye-catcher in the KNX Smart Home with an individually designed glass cover. Its low installation depth ensures that it can be installed almost flush with the wall without the need for a new flush-mounted box.
YOUVI: The All-in-One package for KNX home control
The YOUVI Basic software package is also included in the scope of delivery. The KNX software includes visualisation, IP router and bus monitor software. Thanks to YOUVI and the integrated KNX interface of the Control 16, the execution of all basic control tasks of a KNX smart home is possible without the need to access an external server or IP router. With the YOUVI modules, the range of functions can be flexibly extended.
Easy replacement of the old panel
The installation of the PEAKnx Control 16 in the old flush-mounted box, type SC 10 EGB, is done in just a few simple steps:
- Switch off the power supply and remove your old control panel from the flush-mounted box.
- Use the PEAKnx adapter and attach it to the flush-mounted box.
- Attach the 24 V wires from the power supply to the screw terminals (GND, 24 V) of the Control 16. Connect the KNX and network cables to the panel. Attach the Control 16 to the adapter using the supplied screws.
- Insert the glass cover into the magnet holders.
- Control 16
- Control 16 glass cover
- YOUVI software package basic
- Assembly and operating instructions
- Network connector
- Network patch cable
- Certified cleaning cloth
- Leaflet for cardboard boxes
- Adapter plate
- 4x M4x10 countersunk screws
- 2x M3x12 countersunk screws
Current software, manuals and other documents with information about the Control 16 can be found in our download area.
Specifications
- Intel Dual-Core processor (4 threads), 11th generation
- Fanless convection cooling
- 8 GB RAM
- 256 GB SSD hard drive
- 15.6 inch Full-HD LED LCD display
- Resolution 1920 x 1080 pixels
- Adaptive brightness
- Automatic switching on of the screen via
proximity sensor - Multi-touch, PCAP touch technology
- 5 side-buttons
- Integrated stereo speakers and microphone
- WiFi 2.4 GHz, 5 GHz, Bluetooth 5.2
Ports
- 2 x USB A 2.0 (front port)
- 1 x USB C 3.2 Gen2
- 1 gigabit Ethernet
- KNX
- Supply terminals: 24 V DC, GND
Software
- Operating system: Windows IoT Enterprise LTSC
- YOUVI software package basic
Dimensions
- Dimensions Control 16 (W x H x D): 378.4 mm x 245.5 mm x 26 mm
- Dimensions glass cover (W x H x D): 387.4mm x 231.1 mm x 1.5 mm
Supply and power consumption
- Supply voltage: 24 V DC 2.4 A
- Operation (idle): 6 W
- Operation (full-load): 40 W
- Server operation without LCD: 4 W
Compatible control panels:
- Jung Smart Control 10
